上海淞江NG耐油橡胶接头主要用在进口的液压设备或者注塑机等设备上面。

　　Two battles of Shanghai jiang NG oil resistant rubber compensator is mainly used in imported hydraulic equipment or devices such as injection molding.

　　NG耐油橡胶接头Compensator

　　SAE法兰尺寸 1寸-5寸 SAE 1” to 5”

　　NG耐油橡胶接头与可转动的SAE法兰弹性连接器。NG耐油橡胶接头是用于吸收阻尼振动,振动,噪声，补偿管道设备轴向和横向位移方向。

　　Rubber compensators are elastic connectors with turnable SAE flanges. Compensators are used for damping oscillations, vibrations, noises and movements in axial and transversal direction.

　　设计 Design

　　NG耐油橡胶接头有一个表面硫化橡胶阀体(内部和外部)。外部橡胶耐腐蚀、耐磨损、耐老化。内部橡胶部分由nitril-butadien-caoutchouc(丁腈橡胶)做成，耐油性能良好。

　　Rubber compensators have a plain surface vulcanized to a fabric body (inside and outside) of the rubber part. The outside is weather resistant and protects the fabric against ageing, wear and corrosion. The interior of the rubber part consists of nitril-butadien-caoutchouc (BUNA-N). Because compensators have tightening lips on both sides, further seals are not necessary.

　　使用范围 Use

　　所有矿物油产品,原油、润滑油、冷却油(-20°C到80°C,断断续续的100°C),油脂、冷水、温水60°C,水/油乳剂、燃料芳烃含量为30%。在吸入和返回线操作。

　　For all mineral oil products, crude oil, lubrication oil, cooling oil (-20°C up to 80°C, intermittent 100°C), grease, co

　　材料 Material

　　内部 inside ：丁腈橡胶/氯丁橡胶 NBR/CR

　　外部 outside： 氯丁橡胶 CR

　　法兰 flange：钢 steel

　　工作压力 ：Working Pressure

　　最大工作压力允许范围：0.2bar-1.5bar

　　maximum working pressure 0,2 to 1,5 bar absolute

　　安装前,请阅读手册NG耐油橡胶接头的最大伸缩范围!注意,尺寸公差参照以上参数表。

　　Please read manual before installation and for the maximum movement tolerances of the rubber connection! Note, that the dim

　　以上关于NG橡胶接头|NG耐油橡胶接头|上海淞江NG耐油橡胶接头信息来源于上海橡胶软接头|上海弹簧减震器|上海金属软管首选上海淞江减震器制造有限公司，更多关于NG橡胶接头|NG耐油橡胶接头|上海淞江NG耐油橡胶接头信息您可以登录我们的官方网站：https://www.shsjjzq.com/或者拨打我们的服务热线：021-60547776。